Showing posts with label condenser fan. Show all posts
Showing posts with label condenser fan. Show all posts

Saturday, May 21, 2016

DIY Replacement 2000 Infiniti I30 Dual Radiator Fan Motor Assembly

This is DIY for a 2000 Infiniti I30 Dual Radiator Fan Motor Assembly replacement .

If you notice that at a stop light your A/C gets hot but when you drive the A/C gets cool or your temperature rises slightly on a stop but lowers on the drive on a dual radiator fan that means the A/C condenser fan is NOT working - Both fans should come on when you have the A/C on no matter how cold your motor is that is a easy test .




Remove the clips that hold the intake and then all you have to do is remove the upper hose that is connecting to the radiator only - Then disconnect any electrical plugs - Remove the two bolts holding the assembly to the radiator 





Pull the assembly up and out - Make sure you put the heat shield from the old assembly to the new on to keep the motor from burning out from your exhaust pipe - Reconnect the plugs - Put your A/C on to make sure both fans go on 




This DIY did not take long 








More DIY at www.corollacarclub.proboards.com 






.

Thursday, March 19, 2015

DIY Replacing A/C Condenser Fan Honda CRV 2000



This is a DIY on a 2000 Honda CRV - First you remove all the clips on top of the radiator so that the shield can be taking off to see the fan .





 
Once you remove the plastic shield you will take off the two nuts holding the fan that is to the LEFT of the radiator - The RIGHT side is for the temperature switch . Then you remove the reservoir for the antifreeze .
 
 
 
There is a bracket that holds the radiator down remove those on each side on the top , Then you remove the bracket that is holding the grill and the plastic bumper off to - This way you can lean the radiator forward and pull out the fan
 

 
On the bottom you remove the clips that hold the water shield to the vehicle - You need to remove the little drain hose from the bracket of the condenser fan and a plug that is clipped to the bracket .



 
Once everything is loosen then you pull the radiator forward carefully and remove the fan from the top .
 


 
Then once you remove the fan you follow the steps in reverse to put the new fan back - You might have to purchase new clips cause when they are old they break - There is about 25 or more clips better to purchase them from eBay where they are cheaper .
 
 
 
 
 
 
 
 
 
 
 
 
 
.