DIY - Yellow Vinyl Wrap Fog Light 2009 Toyota Rav4

This DIY in on a 2009 Toyota Rav4 but you can do this to any vehicle 

To remove to chrome trim around your fog light all you have to do is put a screw driver behind and pull forward lightly you will see 4 clips holding it - Once removed clean area and lens up . 

Once you measure then you can cut a small piece of vinyl - You can do this without removing the fog light assembly - Gently push the vinyl over the lens if heat gun is needed then use it if you have sun let vinyl sit in the sun for a few minutes to soften .  

With a sharp blade you can trim up the area around the lens then with a plastic tool gently remove all the air out of the vinyl then you can put everything back together . 

There you have it a JDM look .

More DIY @ www.corollacarclub.proboards.com

.

DIY - Modification Applying Vinyl Eyelids on a 2005 Toyota Corolla

This DIY was done to a 2005 Corolla but this can be done on any vehicle .

Make sure you clean your headlights and have a tape measure cause you want to make sure both sides are even .

When you apply the vinyl before cutting the edges get all of the air bubbles out .

Once every thing looks good trim off the extra . 

There you have it eyelids for your vehicle .

This modification is up to you on whether you want short eyelids or large .

Remember when you put eyelids on your car now your light will beam forward and not outward so if you feel like you lost lighting at night that is why .

.