This is a DIY for a 2000 Honda CRV front motor mount .
First thing you do is remove the bottom of the splash guard .
Once you remove the splash guard you will see the front motor mount - There are 3 bolts holding it down - You will need to make sure you support the bottom of the engine just in case the engine drops a little .
You will notice a difference in the bracket - Make sure you put it on the same way - In this photo will see a black mark to indicate its the bottom .
Once you remove the front motor mount you put it back on the same way .
More DIY @ www.corollacarclub.proboards.com