This DIY in on a 2009 Toyota Rav4 but you can do this to any vehicle
To remove to chrome trim around your fog light all you have to do is put a screw driver behind and pull forward lightly you will see 4 clips holding it - Once removed clean area and lens up .
Once you measure then you can cut a small piece of vinyl - You can do this without removing the fog light assembly - Gently push the vinyl over the lens if heat gun is needed then use it if you have sun let vinyl sit in the sun for a few minutes to soften .
With a sharp blade you can trim up the area around the lens then with a plastic tool gently remove all the air out of the vinyl then you can put everything back together .
There you have it a JDM look .
More DIY @ www.corollacarclub.proboards.com
.
No comments:
Post a Comment