This is a DIY for the rear sway bar links & bushings for a Corolla .
The best thing to do is raise your car really high so you don't have to take off the tires of your Corolla .
With a allen key and a open end wrench you remove the upper nut and lower nut .
While you have the link off then you can remove the sway bar bushings , I did one side at a time you can do both but I found this easier .
Then the same way you took them off you put them back on .
You will feel a difference in your handling .
More info www.corollacarclub.proboards.com
.
No comments:
Post a Comment