Tuesday, April 5, 2016

DIY Replacing Harmonic Balancer 2000 Infiniti I30

This is a DIY on how to replace a harmonic balancer on a 2000 Infiniti I30 

First thing you must do is to remove the belts - You have the belt adjuster to the right that tightens the alternator and air condition - Then to your left you have the power steering pump that needs to be loosen as well - Once you have the belts off then you can continue

With a impact wrench you remove the middle bolt then with a pulley gently remove the harmonic balancer 

Make sure after you remove the harmonic balancer check to make sure the key is still in place and there is no scratches or burrs on the shaft - Then you can replace the timing cover shaft seal 

Make sure the two balancer are equal - Gently slide the balancer where the key will slide through the balancer with our force 

Then with a impact you can tighten the harmonic balancer - then you can put the belt back on and check for leaks 

This is the best time to replace both belts and any other parts that look worn out especially on a car with over 100.000 miles on it whether leaking or not replace now then later 

More DIY at www.corollacarclub.proboards.com 


No comments:

Post a Comment