Wednesday, May 31, 2017

DIY Replacing Passenger Rear Door Handle on a 03 - 08 Corolla

This is DIY for a 03 - 08 Corolla . 

I got the handle according to the color of the vehicle from the dealership .

Part Number # 69211-AA020-B1

Remove the hidden screw behind the inside handle - Then pull up the arm wrest and you will see two more screws then unplug the window switch .

Pull the panel away then where the latch assembly is remove the three screws gently push down the latch assembly making room to put tool through.

With a torx screw driver loosen the screw where the cap is held on then you can gently remove the cap with out making the screw fall out then slide in handle then reverse the process .

There you have it simple .



  1. Do you have a spam problem on this blog; I also am a blogger, and I was wanting to know your situation; we have created some nice practices and we are looking to trade techniques with other folks, be sure to shoot me an email if interested.
    designer door handles

  2. Thanks for all your valuable hard work on this site. My mum really likes conducting investigations and it's easy to see why. All of us notice all relating to the compelling means you offer sensible guidance by means of the web blog and even boost response from other ones about this theme so my simple princess is undoubtedly being taught a whole lot. Take pleasure in the remaining portion of the new year. Your performing a stunning job. custom front door handles