DIY Passenger Side Motor Mount 2002 Honda CRV

This is a DIY for a 2002 Honda CRV passenger side motor mount replacement 

This is a real simple DIY  - All you have to do is support the motor on the bottom with a piece of wood on a floor jack raise it up enough to tough the pan - If needed with that cushion you can raise or lower gently - Total of 6 bolts to remove after you move the power steering pump over .

Its self explanatory in the photos - Once you remove the bracket first on the side of the motor then you can remove the bolts that hold in the motor mount - Remember motor mounts are not just replaced because they are broken they should be replaced because of mileage and they do sink - Changing these can help you with your CV shafts to cause the motor should be up not down binding the CV shafts .


More DIY at www.COROLLACARCLUB.proboards.com







.