This DIY is for a 2000 Infiniti I30 Clock Bulb Replacement
To get to the clock you have to pull then vent out and on the left and right of the top you will see two screws to remove and then the whole top piece that the clock is connected to will come out .
It is easier if you remove the clock from the top part to get to the one side of the bulb
This is a special bulb either called a T2 or the OEM number is 27545-1W600 - These bulbs will fit the heater control panel as well - Gently twist with a Phillips screw driver just a tiny bit and the bulb will come out - When you put the new ones in be gentle cause you can damage the plastic on the back then it will be a pain in the butt to put back - You only need to turn just a tiny bit - With your finger make sure bulb is secure before reassemble or connect to make sure it is working
Once you are done then you can put it all back - I don't know why my camera made it look almost purple but the bulbs do have a blue tip on them and they do shine a bright white
More DIY - www.COROLLACARCLUB.proboards.com
.
No comments:
Post a Comment