Monday, October 5, 2015

DIY - Radio Installation 2000 Infiniti I30

This is for a 2000 Infiniti I30 with a Bose system 








Remove the vent first with a flat head screw driver - Then you can remove the bottom plate where the shift selector is - Then you will see 2 screws on top and the other two screws under the ashtray - Then carefully unplug the stereo 











Now with the radio installation kit for single or double din - You will need to make sure that you remove the A/C switch and the ashtray - The radio screws WILL NOT come out - You have to put the new stereo and the A/C switch and ashtray on the new bracket - Once you put it all together you will see how easy it is to do 







Make sure you get the correct wire kit - On my vehicle I didn't need anything special other then the RCA male jack ends - You must connect the antenna and you must put the two blue wires to a hot wire to turn the amp on that the Bose system has in the trunk - This stereo is a DVD player that plays videos to I had to ground the wire to keep the TV in while driving - Again I did notice if the antenna is NOT connected during testing the stereo will not come on - The blue wire has to be connected to the power line as well for the rear speakers to work - Once you are done then you can reinstall the stereo 





More DIY @ www.corollacarclub.proboards.com 











.

No comments:

Post a Comment