This is a DIY for a 2000 Honda CRV rear brakes conversion to slotted rotors
First you remove the rear brake caliper then you remove the brake caliper bracket
With a screw driver you remove the two screws holding the rotor to the shaft
Inspect and clean emergency brake shows that are located inside the rotor
Replace all the hardware that is supplied - make sure slotted rotors are facing the correct direction - put everything back the same way you removed the old parts
More DIY @ www.COROLLACARCLUB.proboards.com
.
The storage console in the centre armrest of Honda CRV 2020 is deep enough to store a handbag, which no other SUV in the segment can boast of.
ReplyDelete