This DIY is how to upgrade you standard bulbs to a LED bulbs for your reverse lights and tag lights on a 2009 Toyota Rav4
This is real simple with a flat head screwdriver you remove the tag light assembly from the left and pull down replacing your bulb and putting in the LED bulb .
Now on this one the only bulbs you can replace in this lens is the reverse bulb , turn signal bulb and side marker .
That is because the brake light bulbs are factory LED so if one of those blows out you have to replace the brake light assembly .
You pop to door open where the jack is located and on the passenger side you will se a door as well to . By slipping your small hand inside you can locate the bulbs and replace them to a upgraded LED bulb .
More DIY @ www.corollacarclub.proboards.com
.
No comments:
Post a Comment