DIY - Installing LED Reverse Light , Rear Side Marker & Tag Light Bulb 2009 Toyota Rav4

This DIY is how to upgrade you standard bulbs to a LED bulbs for your reverse lights and tag lights on a 2009 Toyota Rav4 

This is real simple with a flat head screwdriver you remove the tag light assembly from the left and pull down replacing your bulb and putting in the LED bulb . 

Now on this one the only bulbs you can replace in this lens is the reverse bulb , turn signal bulb and side marker .

That is because the brake light bulbs are factory LED so if one of those blows out you have to replace the brake light assembly . 

You pop to door open where the jack is located and on the passenger side you will se a door as well to . By slipping your small hand inside you can locate the bulbs and replace them to a upgraded LED bulb . 

More DIY @ www.corollacarclub.proboards.com 

.

DIY - Troubleshooting Rear Back Up Lights Not Working 2005 Toyota Corolla

This DIY is for ANY 9nth Generation Corolla 

When you have checked the bulbs and the wires in the elbow of the trunk .

I don't know why mine was missing a piece but as I did for the trunk light I traced my rear back up light wire to this opened end box . 

You have to pull down the driver side carpet to find this junction of wires .

As you can see the 3 wires are connected to get the both back up lights to work . 

The bottom 2 wires are for the trunk light which I do have another DIY on it . 

These are many angles of how it should look - I don't know what was missing but if I go to a junk yard I will look for this piece . 

More DIY @ www.corollacarclub.proboards.com 

.