DIY 9th Gen Corolla Radio Installation

This is a DIY on how to remove and replace your stereo in your 9th  gen corolla . First things you need is a after market stereo , the face plate and the radio wire . When removing the vent face the OEM stereo face will come apart leaving the main component in the car . Once you pull forward gently then you disconnect the wire that goes from the face pate to the stereo . Then you can unscrew the stereo from its brackets . Then once you remove the main part of the stereo then you install the new face plate and wire up the after market stereo to the OEM set up . 

Then you reinstall the stereo with the new face plate back in . Before you put the vents back on make sure everything is working and fits .

Then put the vent face back on and there you have it a easy install . 

More DIY at www.corollacarclub.proboards.com 

.

DIY Disable DRL Corolla 2007

This DIY is on how to disable your Daytime Running Lights for your 9th Gen Corolla .

The purpose of doing this is to install HID to your vehicle with out damaging the ballast due to low current .

1. Find black box under dash located under the steering wheel

2. Find yellow wire coming out of the DRL black box

3. Cut the wire and leave enough so you can add a butt connector

4. Gound out the yellow wire coming from the DRL black box

5. Safely protect the exposed wire with a butt connecter

6. Then you should have just disabled your DRL if everything was done correctly

MAKE SURE YOU HAVE GOOD GROUND .

THIS IS A EASY DIY ONCE YOU LOCATE THE DRL BOX.

More info and help at www.corollacarclub.proboards.com