Thursday, April 18, 2013

DIY 93-97 Corolla Front Motor Mount Replacement

 
This DIY is for the front motor mount .
 


 
To remove and replace this motor mount you do not need a jack to hold the motor from tilting . You need to replace the splash guard from the bottom and do all the work from underneath the corolla .
 



 
Basically three bolts holding this mount down .
 


 
Once you remove the mount just replace it the same way you took it off .
 
 
This is what it will look like when you are finished .
 
 
 
 
 
 
.


1 comment:

  1. Thank you!! Needed the pictures for the orientation of the front mount.

    ReplyDelete