DIY Replacing Clip Rivet Retainer Fasteners for a Corolla

This is clips for a Corolla but it can be universal for any type of vehicle .

But splash guards purpose is to keep water from splashing on your motor and other parts especially your a/c from rusting and going out . Some people cam care less but this is highly important and if you have a show car even better to keep it clean from snow , mud or water .

Real simple to clip in , Just find the fastener that fits your needs . 

For this I used Clip Rivet Retainer Fastener 18/7.5/7mm; 0.71/0.3/0.28 inch

.

DIY Replacing Driver Side Fender Liner 03 - 08 Corolla

This is a DIY for a 03 - 08 Corolla driver side fender liner .

The importance of this is to keep water out as you hit puddles or when it rains from ruining your fog lights and if you live in a area that snows a lot keeps snow from piling up inside your fender .

                                    

These are the clips I purchased on ebay .

18/7.57/mm: 0.71/0.3/0.28 inch

Clip Rivet Retainer Fastener 

Part Number for Driver Side Fender Liner Toyota OEM #538760 - 2090 . 

Locating all the wholes for the retainer clips make sure you clip them all . Easier if you take the tire off but if you are flexible then keep tire on . 

.