DIY Modification Dual Electric Horns 03 - 08 Corolla

This is a DIY for a 03 - 08 Corolla changing the OEM horn to a Dual Electric Horn .

The easy way to do this is with the grille off - Just two screws holding it 

Then you can wire it up real simple one is positive the other is ground - Carefully measure the horns so that it can be even - Then ground the ground wire to the vehicle and the positive to the wire that the OEM horn came from .

This is what it will look like and everyone will hear you .

.

DIY Removing Front Spoiler Fog Light Assembly on a 03 - 08 Corolla S

This is a DIY on how to remove the fog light assembly on a 03 - 08 Corolla S model vehicle with the body kit .

Part Number for a New Driver side Fog Light OEM # 81220-AA011

Once you remove the front of the fender liner bolt then you come to the back of the front bumper spoiler and remove that screw .

Now under the car behind the bumper cover you will see c lips that hold the front spoiler , Just remove them pull lip forward then pull fog light assembly out .

There you have it then put the new assembly and reverse the process.

.

DIY Replacing Driver Side Fender Liner 03 - 08 Corolla

This is a DIY for a 03 - 08 Corolla driver side fender liner .

The importance of this is to keep water out as you hit puddles or when it rains from ruining your fog lights and if you live in a area that snows a lot keeps snow from piling up inside your fender .

                                    

These are the clips I purchased on ebay .

18/7.57/mm: 0.71/0.3/0.28 inch

Clip Rivet Retainer Fastener 

Part Number for Driver Side Fender Liner Toyota OEM #538760 - 2090 . 

Locating all the wholes for the retainer clips make sure you clip them all . Easier if you take the tire off but if you are flexible then keep tire on . 

.