DIY - Replacement all Interior bulbs to LED bulbs 2009 Toyota Rav4

 This is a DIY on how to replace all the interior bulbs to a upgraded LED bulbs in a 2009 Toyota Rav4

Center Dome , Visor Mirrors , Reading Dome Light , Rear Door Light 

When replacing the center dome light all you have to do with a flat head screw driver or a plastic removal tool and separate the lens from the part itself leaving the dome part on the roof .

Now the rear door light is a little tricky , Once you remove the part itself -  NOTE : you must pry from the switch side - Once you have the part removed then you can separate the lens from the piece .

Now the map light or reading light the one for the driver and passenger again you pull away from the area I have my plastic tool .

Now the visor mirror on again you have to pull from the left side of the part then replace it with your new LED bulb 

More DIY @ www.corollacarclub.proboards.com 

.

DIY Replacing a Dome Interior Light Bulb with a 36 LED Panel

This DIY is performed on a 9th gen Corolla but you can do this on any car .

All you need is a 36 LED panel and a small pick/hook tool .

As you can see with the second photo gently remove the cover for the dome light by hooking the one end of it . As you will see the bulb . Make sure the bulb is off cause it can be hot and burn you if left on . 

The LED panel comes with a kit so find the kit that properly fits your needs . Make sure color of the wires are plug in correctly .  

Once you have it working then put the dome plastic cover back on and there you have a easy DIY and a bright interior of a car . 

More DIY on www.corollacarclub.proboards.com 

.

,