Showing posts with label Bulbs. Show all posts
Showing posts with label Bulbs. Show all posts

Tuesday, August 14, 2018

DIY - Installing LED Yellow Fog Light Bulbs 2009 Toyota Rav4

This is a DIY on how to replace and upgrade your fog lights on a Toyota Rav4 2009






Real simple all you have to do is turn the wheel the opposite direction that you are gonna install the bulb .

Pull the splash guard toward you there might be a plastic clip you have to remove . Once you have it pull in then you can see and locate the bulb socket .

Always make sure you have the correct bulb .





Once both sides are done then you can test out the bulbs .






More DIY @ www.corollacarclub.proboards.com 





.

DIY - Replacement all Interior bulbs to LED bulbs 2009 Toyota Rav4

 This is a DIY on how to replace all the interior bulbs to a upgraded LED bulbs in a 2009 Toyota Rav4

Center Dome , Visor Mirrors , Reading Dome Light , Rear Door Light 






When replacing the center dome light all you have to do with a flat head screw driver or a plastic removal tool and separate the lens from the part itself leaving the dome part on the roof .






Now the rear door light is a little tricky , Once you remove the part itself -  NOTE : you must pry from the switch side - Once you have the part removed then you can separate the lens from the piece .









Now the map light or reading light the one for the driver and passenger again you pull away from the area I have my plastic tool .







Now the visor mirror on again you have to pull from the left side of the part then replace it with your new LED bulb 








More DIY @ www.corollacarclub.proboards.com 







.

Thursday, March 4, 2010

DIY 9005/9006 Bulb to H4 Conversion Corolla

Connect prong 85 on the relay , to the red w/ green stripe wire on the high beam plug of the car. Connect prong 86 on the relay , to the red w/ yellow stripe wire on the same high beam plug.connect prong 30 on relay , to red w/ blue stripe wire on the low beam side plug. 87a prong on the relay goes to the top prong on the H4 bulb for low beam power. Connect prong 87 on relay to the right plug on the H4 bulb , for high beam power. Now ground the bulb , to either , the white w/ black stripe wire on the low beam plug or the chassis.