DIY - Replacement all Interior bulbs to LED bulbs 2009 Toyota Rav4

 This is a DIY on how to replace all the interior bulbs to a upgraded LED bulbs in a 2009 Toyota Rav4

Center Dome , Visor Mirrors , Reading Dome Light , Rear Door Light 

When replacing the center dome light all you have to do with a flat head screw driver or a plastic removal tool and separate the lens from the part itself leaving the dome part on the roof .

Now the rear door light is a little tricky , Once you remove the part itself -  NOTE : you must pry from the switch side - Once you have the part removed then you can separate the lens from the piece .

Now the map light or reading light the one for the driver and passenger again you pull away from the area I have my plastic tool .

Now the visor mirror on again you have to pull from the left side of the part then replace it with your new LED bulb 

More DIY @ www.corollacarclub.proboards.com 

.

DIY ABS Replacement Front Grille on a 03 - 08 Corolla S

This DIY is for a 03 - 08 Corolla front grille and putting a ABS grille .

On the two corners of the old grille remove the two screws and the center fastener then the bottom has to push clips you need to release .

Now you might have to modify the bumper with some grinding because the ABS grille os for a Toyota Altis .

Then reverse the process in my case I found a Corolla S emblem and silicone it to the grille .

.

DIY Removing Front Spoiler Fog Light Assembly on a 03 - 08 Corolla S

This is a DIY on how to remove the fog light assembly on a 03 - 08 Corolla S model vehicle with the body kit .

Part Number for a New Driver side Fog Light OEM # 81220-AA011

Once you remove the front of the fender liner bolt then you come to the back of the front bumper spoiler and remove that screw .

Now under the car behind the bumper cover you will see c lips that hold the front spoiler , Just remove them pull lip forward then pull fog light assembly out .

There you have it then put the new assembly and reverse the process.

.

DIY Rebadging or Debadging/Removal your Corolla Emblem

This is a DIY for either rebadging or debadging your vehicle . This was done on a Corolla to Altis Badge .

       

Many people use different things or have different ways . This is how I did mine . I removed the badge with a plastic panel trim remover so I wouldn't harm the paint . 

Then I used the sticker lifter made kit by goop which is easy on the hands and fingers . You might have to keep doing this till all the glue is gone best to do it in direct sun light so the adhesive can get soft .

In my case I rebadged the Corolla to Altis .

.