This is a very simple DIY . I purchased another seat belt from my local junk yard .
First you remove the plastic panel cover that so that you can expose the the seat belt cause one side runs behind the plastic panel cover and the seat belt box has a bolt holding it in place .
Then you go to the bottom and remove the bolt . There is a bolt cover so you must lift it up . Then right above this is the seat belt box where there is another bolt you have to remove to .
Then with a flat head you lift up the flap to expose the top bolt .
Then you remove the top bolt and then you are done removing it , Then you reverse the procedure and put your replacement seat belt back on .
First you remove the plastic panel cover that so that you can expose the the seat belt cause one side runs behind the plastic panel cover and the seat belt box has a bolt holding it in place .
Then you go to the bottom and remove the bolt . There is a bolt cover so you must lift it up . Then right above this is the seat belt box where there is another bolt you have to remove to . 
Then with a flat head you lift up the flap to expose the top bolt .
Then you remove the top bolt and then you are done removing it , Then you reverse the procedure and put your replacement seat belt back on .
No comments:
Post a Comment