DIY - Front Brakes and Rotors 2000 Infiniti I30

This is a DIY on how to replace front brakes and rotors on a 2000 Infiniti I30

 

 

First you remove the two bolts holding the caliper to the caliper bracket , Using a screw driver if needed to help pry the parts apart gently

 

 

Once you remove the caliper hang it some where safe where it will not fall and brake the line

 

Then you can remove the two bolts holding the bracket to the spindle

 

 

Then with a brake caliper tool push the cylinder back - Make sure you unscrew but do not remove the brake master cylinder cap so that when you push the fluid back it will be easier - Do not leave the cap off cause brake fluid will absorb moisture .

 

 

It is recommended to replace the hardware kit an do a brake flush - If your not replacing the rotors then have them resurface - If you haven't done a brake flush this is the perfect time to do so .

 



 

Once you have completed everything then you can put everything back together , Test brakes before starting the vehicle.

 

 

 

More DIY @ www.corollacarclub.proboards.com

 

 

 

 

 

.