Tuesday, April 7, 2015

DIY - Front Brake and Rotors 2000 Toyota Camry

This is a DIY for front brakes and rotors for a 2000 Toyota Camry
 



 
First you remove the top and bottom bolt that holds the brake caliper to the bracket - Once you have taken the caliper off then you remove the front pads - If needed help use a flat head screw driver - Once you have the pads off remove the two bolts holding the caliper bracket to the spindle - From there you can remove the rotor
 


Make sure you inspect the new rotors to the old ones - In this year Camry there is a difference between a 14 inch rim and a 15 inch rim - Rotors do come in two different sizes - If you are using slotted rotors make sure they are facing the correct direction
 

 
Then with a brake caliper tool push the caliper back
 
 
 
Once you are done then you can replace everything back the same way you took it off
 
 
 
 
 
 
 
 
 
. 

No comments:

Post a Comment