DIY - Front Strut Replacement 2000 Infiniti I30

This is a DIY on how to remove and replace front struts on a 2000 Infiniti I30

 

 

You can start by loosening the bottom bolts on the strut but do not remove the bolt - Then you can disconnect the ABS wire from the strut , Then you can remove the bolt that holds the ABS wire ,Then you can push off the clip that holds the brake line to the strut

 

 

Notice in this you will see a hook facing up - This is important that it goes back to its original spot when completed

 

 

 

Once you completed the bottom then you can remove the nuts that hold the strut mount to the vehicle

 

 

This is very important to remember to keep the word OUT towards the tires

 

 

Then by using the spring compressor then you can remove the center bolt that holds the strut plate to the strut

 

Remember to line up everything when putting back the strut mount cause this separates as the photo above

 



 

 

Once you put your spring on the new strut then you can reverse the process

 

 

 

 

More DIY @ www.corollacarclub.proboards.com

 

 

 

 

 

 

.