Thursday, April 2, 2015

DIY - Front Strut Replacement 2000 Infiniti I30

This is a DIY on how to remove and replace front struts on a 2000 Infiniti I30
 




 
You can start by loosening the bottom bolts on the strut but do not remove the bolt - Then you can disconnect the ABS wire from the strut , Then you can remove the bolt that holds the ABS wire ,Then you can push off the clip that holds the brake line to the strut
 
 
Notice in this you will see a hook facing up - This is important that it goes back to its original spot when completed
 
 
 
Once you completed the bottom then you can remove the nuts that hold the strut mount to the vehicle
 

 
This is very important to remember to keep the word OUT towards the tires
 

 
Then by using the spring compressor then you can remove the center bolt that holds the strut plate to the strut
 


Remember to line up everything when putting back the strut mount cause this separates as the photo above
 

 
 
Once you put your spring on the new strut then you can reverse the process
 
 
 
 
 
 
 
 
 
 
.

1 comment:

  1. This is a DIY on how to remove and replace front struts on a 2000 Infiniti I30. You can start by loosening the bottom bolts on the strut but do not ... frontstruts.blogspot.com

    ReplyDelete